After choosing the file you may manually select partitions to write.

Select Board Software file (*.skf format) taken from boot-loader flash file area.

Select “Plug the USB cable into the powered off phone…” in the ports selection tab.

'Phone model' dropdown box has to be set to 'Huawei Android (Diag.)'.

Select 'Qualcomm' platform from the tab menu in the upper left side of the software.

Repair bricked device using board software file taken from :.

Factory flash files: -> Downloads -> Sigma -> Huawei -> Factory Flash files.

In some cases Testpoint has to be used to force the device to this mode. Use this guide only for cases, when phone is bricked and doesn’t show any devices while connected to PC, or shows Qualcomm HS-USB QDLoader 9008. Repair bricked Qcom-based Huawei device using board software Important! This time we released the Flash feature for the firmwares that contain 2 files: update.app and customization.app.įirmwares of the latest Huawei models, like P30, contain 3 files.įlashing of such models is not supported Atm and will be added in the next updates. Read the phone info before flashing and use flash file with the same customization settings as is in the phone. This feature is intended for advanced users only.

NOTE! The flashing operation is very risky!ĭo the operation at your own risk. The easiest way is to use the flash files marked with 'Downgrade to bypass FRP'.

You need to change the phone's firmware to the one with the bug.SAFE MODE menu is NOT present in the Recovery Menu, or the previous method did not work: Go to the menu and select System -> Reset -> Reset all settings.Perform wipe data/cache and then press 'Safe mode' menu.Check if 'Safe mode' is present in the Recovery Menu.Enter Recovery Mode by pressing Vol+ and Power On.Huawei developers are aware about this bug and it is fixed in the latest firmware versions. Some Huawei firmware versions have a bug that allows you to remove FRP using 'Safe mode' method.

Huawei s7 701u imei repair service